dump_lfts(8) — Linux manual page

NAME \| SYNOPSIS \| DESCRIPTION \| OPTIONS \| FILES \| SEE ALSO \| AUTHORS \| COLOPHON

DUMP_FTS(8)                 OpenIB Diagnostics                DUMP_FTS(8)

NAME top

       DUMP_FTS - dump InfiniBand forwarding tables

SYNOPSIS top

       dump_fts [options] [<startlid> [<endlid>]]

DESCRIPTION top

       dump_fts is similar to ibroute but dumps tables for every switch
       found in an ibnetdiscover scan of the subnet.

       The dump file format is compatible with loading into OpenSM using
       the -R file -U /path/to/dump-file syntax.

OPTIONS top

-a, --all
show all lids in range, even invalid entries

-n, --no_dests
do not try to resolve destinations

-M, --Multicast
show multicast forwarding tables In this case, the range
parameters are specifying the mlid range.

Port Selection flags
-C, --Ca <ca_name> use the specified ca_name.

-P, --Port <ca_port> use the specified ca_port.

Local port Selection
Multiple port/Multiple CA support: when no IB device or port is
specified (see the "local umad parameters" below), the libibumad
library selects the port to use by the following criteria:

1. the first port that is ACTIVE.

2. if not found, the first port that is UP (physical link up).

If a port and/or CA name is specified, the libibumad library
attempts to fulfill the user request, and will fail if it is
not possible.

For example:

ibaddr # use the first port (criteria #1 above)
ibaddr -C mthca1 # pick the best port from "mthca1" only.
ibaddr -P 2 # use the second (active/up) port from the first available IB device.
ibaddr -C mthca0 -P 2 # use the specified port only.

Debugging flags
-d raise the IB debugging level. May be used several times
(-ddd or -d -d -d).

-e show send and receive errors (timeouts and others)

-h, --help show the usage message

-v, --verbose
increase the application verbosity level. May be used
several times (-vv or -v -v -v)

-V, --version show the version info.

Configuration flags
-t, --timeout <timeout_ms> override the default timeout for the
solicited mads.

-y, --m_key <key>
use the specified M_key for requests. If non-numeric value
(like 'x') is specified then a value will be prompted for.

--node-name-map <node-name-map> Specify a node name map.
This file maps GUIDs to more user friendly names. See FILES
section.

--config, -z <config_file> Specify alternate config file.
Default:
/ssd11/FOSS/rdma-core/build/etc/infiniband-diags/ibdiag.conf

FILES top

   CONFIG FILE
       /ssd11/FOSS/rdma-core/build/etc/infiniband-diags/ibdiag.conf

       A global config file is provided to set some of the common options
       for all tools.  See supplied config file for details.

   NODE NAME MAP FILE FORMAT
       The node name map is used to specify user friendly names for nodes
       in the output.  GUIDs are used to perform the lookup.

       This functionality is provided by the opensm-libs package.  See
       opensm(8) for the file location for your installation.

       Generically:

          # comment
          <guid> "<name>"

       Example:

          # IB1
          # Line cards
          0x0008f104003f125c "IB1 (Rack 11 slot 1   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f125d "IB1 (Rack 11 slot 1   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10d2 "IB1 (Rack 11 slot 2   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10d3 "IB1 (Rack 11 slot 2   ) ISR9288/ISR9096 Voltaire sLB-24D"
          0x0008f104003f10bf "IB1 (Rack 11 slot 12  ) ISR9288/ISR9096 Voltaire sLB-24D"

          # Spines
          0x0008f10400400e2d "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e2e "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e2f "IB1 (Rack 11 spine 1   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e31 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"
          0x0008f10400400e32 "IB1 (Rack 11 spine 2   ) ISR9288 Voltaire sFB-12D"

          # GUID   Node Name
          0x0008f10400411a08 "SW1  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f10400411a28 "SW2  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f10400411a34 "SW3  (Rack  3) ISR9024 Voltaire 9024D"
          0x0008f104004119d0 "SW4  (Rack  3) ISR9024 Voltaire 9024D"

AUTHORS top

       Ira Weiny
              <  <[email protected]>  >

COLOPHON top

       This page is part of the rdma-core (RDMA Core Userspace Libraries
       and Daemons) project.  Information about the project can be found
       at ⟨https://github.com/linux-rdma/rdma-core⟩.  If you have a bug
       report for this manual page, send it to
       [email protected].  This page was obtained from the
       project's upstream Git repository
       ⟨https://github.com/linux-rdma/rdma-core.git⟩ on 2025-08-11.  (At
       that time, the date of the most recent commit that was found in
       the repository was 2025-08-04.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there is
       a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       [email protected]

                                2013-03-26                    DUMP_FTS(8)

Pages that refer to this page: check_lft_balance(8)